The Coconut Diet Forum is the largest coconut health discussion group on the Internet! Hundreds of testimonies in the archives! Join in The Coconut Diet Forums!
History of Palm Oil
The oil palm (Elaeis guineensis) is a native of West Africa. It
flourishes in the humid tropics in groves of varying density, mainly in
the coastal belt between 10 degrees north latitude and 10 degrees south
latitude. It is also found up to 20 degrees south latitude in Central
and East Africa and Madagascar in isolated localities with a suitable
rainfall. It grows on relatively open ground and, therefore, originally
spread along the banks of rivers and later on land cleared by humans for
long-fallow cultivation (Hartley 1988: 5—7).
The palm fruit develops in dense bunches weighing 10 kilograms (kg) or
more and containing more than a thousand individual fruits similar in
size to a small plum. Palm oil is obtained from the flesh of the fruit
and probably formed part of the food supply of the indigenous
populations long before recorded history. It may also have been traded
overland, since archaeological evidence indicates that palm oil was most
likely available in ancient Egypt. The excavation of an early tomb at
Abydos, dated to 3000 B.C., yielded "a mass of several Kilograms still
in the shape of the vessel which contained it" (Friedel 1897).
A
sample of the tomb material was submitted to careful chemical analysis
and found to consist mainly of palmitic acid, glycerol in the combined
and free state, and a mixture of azelaic and pimelic acids. The latter
compounds are normal oxidation products of fatty acids, and the analyst
concluded that the original material was probably palm oil, partly
hydrolyzed and oxidized during its long storage. In view of the rather
large quantity found, the oil was probably intended for dietary purposes
rather than as an unguent.
A
few written records of the local food use of a palm oil (presumably from
Elaeis guineensis) are available in accounts of European
travelers to West Africa from the middle of the fifteenth century. Red
palm oil later became an important item in the provisioning trade
supplying the caravans and ships of the Atlantic slave trade, and it
still remains a popular foodstuff among people of African descent in the
Bahia region of Brazil (Northrup 1978: 178—86; Hartley 1988: 1—3; R.
Lago, personal communication, 1993).
The British Industrial Revolution created a demand for palm oil for
candle making and as a lubricant for machinery. In the early nineteenth
century, West African farmers began to supply a modest export trade, as
well as producing palm oil for their own food needs. After 1900,
European-run plantations were established in Central Africa and
Southeast Asia, and the world trade in palm oil continued to grow
slowly, reaching a level of 250,000 tonnes (metric tons) per annum by
1930 (Empire Marketing Board 1932: 117—23; Hartley 1988: 8—23; Lynn
1989: 227—31).
Meanwhile, the invention of the hydrogenation process for oils and fats
in 1902 created the possibility of Western employment of palm products
as, for example, in the making of margarine. Yet hydrogenation was more
useful for liquid oils like groundnut, palm kernel, and coconut oils
than for palm oil. After World War II, further improvements in palm oil
refining technology and transport methods made it possible to use
largely unhydrogenated palm oil in Western food products (Lim 1967:
130—2; Martin 1988: 45—8).
A
rapid expansion of the palm oil export trade followed, accompanied by a
marked growth in the plantation sector of production. Between 1962 and
1982, world exports of palm oil rose from about 500,000 to 2,400,000
million tonnes per annum, and Malaysia emerged as the world’s largest
producer, accounting for 56 percent of world production and 85 percent
of world exports of palm oil in 1982. Expanded production in Malaysia
was achieved mainly by the privately owned estate sector, which
increased its oil palm holdings more than tenfold in the 1960s and
1970s; and by the Federal Land Development Authority (FELDA), whose
large-scale schemes organized oil production along plantation lines,
although ownership was vested in the workforce of "smallholders" (Khera
1976: 183—5; Moll 1987: 140—62).
By 1990, world production had reached nearly 11,000,000 tonnes per
annum, with a worldwide trade of 8,500,000 tonnes (Mielke 1991: 110).
Although red palm oil is still used in soups and baked dishes in West
Africa, elsewhere in the world, palm oil is eaten mainly in a highly
refined form. Its food uses vary from the vanaspati and ghee of India to
the margarine, cooking oils, and biscuits of Europe and the United
States.
The Oil Palm:
Wild and Planted
West Africa
West Africa is the classic region of smallholder production, both of
food and export crops. The oil palm, which has been both, flourishes in
natural association with yam and cassava cultivation throughout the
wetter parts of the region. In eastern Nigeria, which C. W. S. Hartley
(1988: 7, 16) called "the greatest grove area of Africa," densities of
200 palms per hectare (ha) were common in the late 1940s, and densities
of more than 300 palms per hectare were not unknown.
These palms were typically self-seeded and tended (to varying degrees)
by local farmers. Farther west, in the kingdom of Dahomey and in
settlements established by the Krobo people near Accra, some deliberate
plantings may have been made as the palm oil export trade developed from
the 1830s (Manning 1982; Wilson 1991). However, as J. Reid (1986: 211)
has noted, the word plantation was often used by contemporary
European observers to mean a food farm on which oil palms happened to be
growing. Moreover, although in Dahomey descriptions exist of seedlings
being transplanted from the bush onto areas cleared for farming by
slaves, this does not mean that the practice was universal. In any
event, palm oil exports from Dahomey were much smaller than from the
Niger Delta, where oil palms were planted deliberately in swampy regions
outside their natural habitat, but where the bulk of production was
carried out using natural groves. In the 1840s, Dahomey and the Niger
Delta exported approximately 1,000 and 13,000 tonnes per annum
respectively; by the 1880s these totals had risen to 5,000 and 20,000
(Manning 1982: 352; Reid 1986: 158; Martin 1988: 28—9; Lynn 1989: 241).
Beginning in the late nineteenth century, a number of experimental oil
palm plantations were created by Europeans in West and west-central
Africa. One of the earliest was founded in Gabon in 1870 by Roman
Catholic missionaries (E. J. Mulder, personal communication, 1968). But
like many of the other nineteenth-century plantations in West Africa,
these ventures were unsuccessful. By comparison with African
smallholders, European planters were highly specialized and vulnerable
to the marked trading fluctuations of the late nineteenth century. Many
also lacked capital but committed themselves to long-term investments of
a type that African farmers sensibly rejected.
In the case of palm oil, money was spent paying laborers to produce,
plant, and tend seedlings, often on marginal land, in regions where
natural groves already contained more palms than local farmers could
spare the time to harvest (Hopkins 1973: 212—14; Martin 1988: 46).
Thus, when in 1907 William Lever sought large-scale land concessions in
the British West African colonies in order to produce palm oil for his
Lancashire soap mills, the Colonial Office was reluctant to help him. In
a region characterized by small, fragmented, and often communally owned
farms, it was felt that Lever’s scheme would be hard to administer,
politically risky, and commercially unsound. Lever was left to pursue
his dreams in the Belgian Congo, where the existing levels of both trade
and population were far lower and where the colonial administration
welcomed European enterprise (Hancock 1942: 188—200; Wilson 1954:
159—67).
Following the Lever debate, the West African palm oil industry remained
in the smallholders’ hands. Few other entrepreneurs came forward to
press the case for plantations, although a number of state-run estates
were established under French influence in the Ivory Coast after 1960.
By 1981 these estates covered a total of 52,000 ha, with a further
33,000 ha planted with oil palms in the surrounding villages (Hartley
1988: 31).
Yet even this development was relatively modest in scale, as shown in
unpublished data from Nigeria, West Africa’s largest producer of palm
oil. The area of wild palm groves, only partly harvested, was estimated
at 2,400,000 ha, whereas there were 72,000 ha of estate plantations and
another 97,000 ha of smallholder plantations. Estate plantations, which
require large consolidated areas, are still difficult to create in
Nigeria because the oil palm—growing regions are densely populated and
the complex traditional land holding system has been carefully
preserved. Elsewhere in West Africa, population densities are lower, but
the problems of obtaining labor to sustain plantation developments are
correspondingly greater.
Central Africa
In the late nineteenth century, both the German colonizers of Kamerun
and the Belgian rulers of the Congo were keenly interested in applying
European farming and processing techniques to the palm oil industry
(Laurent 1912—13; Rudin 1938; Jewsiewicki 1983). But German botanical
and mechanical trials were cut short by World War I, following which the
German territories in Africa were divided between the French and the
British.
In the Congo, however, Lever’s initial land- and produce-buying
concessions (granted in 1911) proved to be the foundation for a long
process of experimentation, which eventually revolutionized the palm oil
industry worldwide. New planting materials led to dramatic increases in
yields, thus cutting the cost of production; and improved machinery led
to high oil quality at a competitive price. Alongside developments in
European and American food-processing techniques, the Congo innovations
paved the way for the entry of palm oil into Western diets.
Lever was originally more interested in setting up mills than
plantations in the Congo, but his initial investments brought heavy
losses (Fieldhouse 1978: 507—9). The fruit supply from wild trees proved
hard to control, both in the amount brought to the mill and in its
quality upon arrival. Overripe or bruised palm fruit made for highly
acidic, low-quality oil, whereas unripe bunches gave low yields. Yet
Lever Brothers (and its successor Unilever after 1929) was unwilling to
incur the heavy initial costs of planting trees unless planting
materials were improved to reduce the running costs. The Germans in
Kamerun had identified an exceptionally thin-shelled palm fruit with a
high oil content as early as 1902 (Hartley 1988: 50). But their "lisombe"
palm, later to become known as the Tenera type, was found only rarely in
the wild and failed to breed true.
In a renewed drive to encourage European investment in their colony and,
in particular, in oil palm plantations, the Belgians began in 1922 to
investigate this German discovery. An experimental plantation of Tenera
palms was created at the Yangambi research station in the Congo, and in
the 1930s these palms were subjected to a three-year testing program by
M. Beirnaert. Meanwhile, private Tenera plantings had been made by
Unilever and its subsidiary, the United Africa Company, in the British
Cameroons and in the Belgian Congo itself (Courade 1977; Fieldhouse
1978).
Tenera seed also found its way to Sumatra and Malaya in the 1920s,
although there, as in Central Africa, it failed to breed true.
Beirnaert’s painstaking experiments finally showed why: The Tenera palm
was actually a hybrid of two other types, the thick-shelled Dura and
shell-less Pisifera, and when self-pollinated would produce 50 percent
Tenera, 25 percent Dura and 25 percent Pisifera (Beirnaert and
Vanderweyen 1941).
Beirnaert’s discovery was published at the height of World War II, and
it was not until after 1945 that it could be turned to practical use
with the establishment of large-scale and long-term Tenera breeding
programs. It is ironic that the Congo was not the state that gained the
most. Its oil palm plantations did expand from 52,000 ha in 1938 to
93,000 in 1945 and 147,000 in 1958, with a further 98,000 ha under
smallholder cultivation by the end of that period (Mulder, personal
communication, 1968; Hartley 1988: 30). But political unrest following
independence in 1960 led to stagnation and decline in the industry.
Unilever, however, the most important single investor in 1960 with
47,000 ha under oil palms, remained loyal to the newly independent
country of Zaire through two decades of intermittent losses and
political uncertainty. Thus, Unilever managers remained in place
following nationalization in 1975, and the company was allowed to take
back full control of the estates two years later (Fieldhouse 1978:
530—45). But at a national level, the research effort was decimated, and
new planting was very limited after 1960, in marked contrast to
developments at the same time in Southeast Asia.
Southeast Asia
The oil palm was first introduced to Southeast Asia in 1848, when four
seedlings, originating from West Africa, were planted in the botanical
gardens at Buitenzorg (now Bogor) in Java (Hartley 1988, 21). But this
introduction did not lead to a plantation industry for some time,
although offspring of the palms were used as ornamentals by tobacco
planters.
In 1905 a Belgian agricultural engineer, Adrien Hallet, arrived in
Sumatra and noticed that its palms grew more quickly and bore a richer
fruit than counterparts in the Congo, where he had previously worked.
Just as the oil palms in southeastern Nigeria bore a fruit with more
oily pulp and a smaller kernel than their counterparts farther west, so
did the Deli Dura palms, descended from the four Buitenzorg seedlings,
hold a distinct advantage over the ordinary Duras of West and Central
Africa (Leplae 1939: 25—7; Martin 1988: 47).
This superiority probably reflected the optimal soils, rainfall, and
sunshine conditions of Southeast Asia, rather than any special genetic
quirks of the Buitenzorg palms. However, the fact that all the Deli
Duras were descended from so few parents meant that the early planters
could expect fairly uniform results (Rosenquist 1986). This lowered the
risks associated with plantation cultivation, an effect reinforced by
the absence of the palm’s usual pests and diseases in its new geographic
setting.
The relatively high yields and low risks from planting oil palms in
Southeast Asia helped the industry to grow quickly, following the
pioneering plantings of Hallet in Sumatra and of his friend Henri
Fauconnier in Malaya in the 1910s. By 1919 more than 6,000 ha had been
planted in Sumatra, rising to 32,000 in 1925, by which time 3,400 ha had
come under cultivation in Malaya. Over the next five years, a further
17,000 ha were planted in Malaya, while the Sumatran area doubled.
This rapid expansion came not only because of growing confidence in the
oil palm but also because of the grave postwar problems of the rubber
industry. The oil palm was seen as a useful means of diversification to
avoid a dangerous dependence on rubber. The pace of new planting slowed
during the worldwide slump of the 1930s, but by 1938 Malaya had nearly
30,000 and Sumatra more than 90,000 ha under cultivation (Lim 1967:
Appendix 5.2; Creutzberg 1975: Table 11; Hartley 1988: 21).
Developments in Sumatra hung fire for some time after 1945, as shown in
Table II.E.3.1. Meanwhile, developments in Malaysia were more rapid,
especially after 1960, when the replanting of old rubber estates with
oil palms was stimulated by FELDA’s smallholder schemes.
At the same time, the Malaysian government and the estate sector
launched several systematic Tenera-breeding efforts, in which
high-yielding parents were selected and through which increasingly
productive planting materials were generated. The new trees not only
yielded more fruit but also produced a type of fruit that was ideally
suited to the new screw presses which, having been tried out in the
1950s in the Belgian Congo, became widely used in Malaysia from the
mid-1960s. These innovative developments have been described as "one of
the world’s outstanding agricultural achievements" (Anwar 1981). The
land area involved is shown in Table II.E.3.2.
Latin America
A
distinct species of the oil palm, Elaeis oleifera (also known as
Elaeis melanococca), is indigenous to Latin America. Since the
late 1960s, plant breeders have begun to take an interest in this
variety because its oil has a high iodine value and unsaturated fatty
acid content, making it especially suitable for food use. However, the
fruit is often small, with a thin oil-yielding mesocarp surrounding a
large, thick-shelled kernel. Harvested bunches often contain a low
proportion of fruit of quite variable quality. Hence, the plant has not
been cultivated commercially, although it is frequently found in
riverside or swampy areas, and the oil is used locally for cooking, soap
boiling, and lamp fuel (Hartley 1988: 85—9, 681—3).
Elaeis guineensis seeds were introduced to Central America by the
United Fruit Company, which brought seeds from Sierra Leone to Guatemala
in 1920, and from Malaysia to Panama in 1926 and Honduras in 1927. Other
introductions from Java and the Belgian Congo followed, but the first
commercial planting of 250 ha took place only in Guatemala in 1940. The
United Fruit Company’s main interest was, traditionally, the production
of bananas for export, but large banana-producing areas were destroyed
by Fusarium wilt, and in consequence, oil palm and other crops were
being tested as replacements.
The oil palm, however, proved vulnerable to disease in its new setting,
and difficulties were encountered in identifying suitable growing
conditions. Nonetheless, a successful development was founded on the
northern coastal plain of Honduras, and in addition to developing
plantations on its own land, the United Fruit Company stimulated oil
palm cultivation by neighboring smallholders, whose fruit could then be
processed in the company mills. Seed was also supplied to other Latin
American countries (Hartley 1988: 33—6; D. L. Richardson, personal
communication, 1993).
The beginnings of commercial planting in Latin America are summarized in
Table II.E.3.3. By 1992 the total area planted to Elaeis guineensis
in Latin America had grown to 390,000 ha — still a small fraction of the
area in Africa or Southeast Asia. The distribution of plantings by
country and sector is shown in Table II.E.3.4.
Processing
Technology
Until the early years of the twentieth century, palm oil was processed
only by traditional village methods, by which loose fruits were
collected from the ground or a few bunches were cut from the tree.
Beginning in the 1920s, however, the United Africa Company and British
colonial officials in Nigeria started experimenting with steam cookers
and hand presses designed to make production at the village level more
efficient in terms of labor use and oil yield. Yet a lack of cash
prevented most farmers from trying the new machinery, with the exception
of a few lucky recipients of free samples or government subsidies in the
1940s (Martin 1988: 64—6, 127—9).
A
separate process of trial and error led to the development of the
sophisticated factories required to deal with the volume of fruit
produced on modern plantations and to produce oil of the high and
standardized quality that would appeal to Western food processors. Such
factories handle almost all the palm fruit of Southeast Asia, whereas in
West Africa and Latin America, processing is carried out by a wide
variety of methods, yielding oil for local consumption and for
industrial as well as edible uses in the West.
Whatever the scale and sophistication of the process, the following main
steps are required:
1. Separation of
individual fruits from the bunch.
2. Softening of
the fruit flesh.
3. Pressing out
of the oily liquid.
4. Purification
of the oil.
Traditional
Village Process
Whole, ripe, fresh fruit bunches (FFB) are cut from the palm. With young
trees this can be done from ground level. With older trees in West
Africa, harvesting is still often accomplished by a man climbing the
tree, secured to it by a loop of rope or other locally available
materials, such as rattan and raffia fiber (Vanderyst 1920). But on
plantations, a curved knife attached to a bamboo is used. After cutting,
most of the fruits are still firmly attached to the bunches, which are
divided into a few sections, heaped together, moistened, and covered
with leaves. Natural fermentation during two to three days loosens the
fruits so that they can be picked off the bunch sections by hand.
Following this step, two major variants in the process are used to
produce two oils with different characteristics — those of soft oil and
those of hard oil. The regions producing each type have changed since
Julius Lewkowitsch (1895: 429) identified Saltpond in present-day Ghana
as the cheapest source of hard oil, and Drewin on the Ivory Coast as the
best place to buy soft oil. But the basic methods have changed little
since they were first described by colonial officials in the 1910s and
1920s (Laurent 1912—13; Gray 1922; Faulkner and Lewis 1923; Martin 1988:
32—3).
For soft oil production, the fruits are separated as soon as they are
loose enough and boiled with water for 4 hours to soften the flesh,
which is very fibrous. The cooked fruit is emptied into a large
container, which may be a pit lined with clay, an iron drum, or a large
wooden mortar. It is then reduced to a pulp with pestles or by treading
it under foot. The resulting mash may be diluted with water, and the oil
is skimmed off or squeezed out of the fibrous mash by hand. In some
instances, a sieve made of palm fronds is used to retain the fibers. At
this stage the liquid product, which contains oil, water, and fruit
fibers, is often boiled up with additional water and skimmed again,
although this step is omitted in some cases. Finally, the oil is again
heated to boil out the residual water.
Lewkowitsch (1922: 546) also reported on the preparation of small
quantities of oil for kitchen use directly from freshly picked fruit, by
boiling the fruit and skimming the oil. Such oil had good keeping
properties and often a free fatty acid content below 2 percent; but
yield was very low, and not available for export.
In the hard-oil process, the fruit is allowed to ferment for 3 or more
days longer than in the
soft-oil process, until the flesh is soft enough. It
is then pulped by treading underfoot in an old canoe or pounding in a
mortar. Oil is allowed to drain out for up to 3 days, then water is
added, and the mix is trodden again. Further oil rises to the surface
and is skimmed. The oil is boiled up with water in another container and
finished as described for soft oil.
These two processes differ in some important respects. The prolonged
fermentation in the hard-oil process results in a much greater enzymic
breakdown of the neutral fat and, therefore, in a much higher free fatty
acid content. The yield obtained by this process is also much lower.
However, it has a substantial advantage in that the labor and firewood
requirements are also much lower. Table II.E.3.5 summarizes these
differences.
The strong characteristic flavors developed during both of these
processes, as well as the naturally strong red color of the oil, are
appreciated by local cooks and visiting gourmets, but they present
severe limitations in the export markets. The high free fatty acid
content and solid consistency of hard oil limits its range of uses,
making it well suited to soap boiling but not to food processing. The
solid consistency of hard oil is not due directly to the free fatty
acids formed during the fermentation step but rather to the
diglycerides, the other fragments obtained when one fatty acid is split
from the neutral triglyceride molecule. M. Loncin and B. Jacobsberg
(1965) have demonstrated the formation of a eutectic between
triglycerides and diglycerides, resulting in a minimum melting point and
maximum softness at a diglyceride content of 7 percent.
Mechanization of
the Small-Scale Process
With the rapid twentieth-century growth in West African exports came the
introduction of simple machines to reduce labor requirements and
increase oil yield from a given quantity of fruit. Early machines,
before and after the 1914—18 war, as described by Hartley (1988:
694—703), included a cylinder fitted with manually operated beaters,
which was fed with softened fruit and hot water. After "beating," an
oil-water mixture was run off through a sieve. Another system used a
special cooker and a press as adjuncts to the soft-oil process.
The first device to become widely adopted, however, was a modified wine
and cider press: the Duchscher press. This consisted of a cylindrical
cage of wooden slats, held in place by iron hoops, and a ram on a screw
thread. The screw thread was turned manually by means of long bars (in
the manner of a ship’s capstan), forcing the ram onto the pulped fruit.
The exuding liquid was collected in a trough surrounding the cage.
Similar presses, but using a perforated cylindrical metal cage, are
still in use today, giving yields of 55 to 65 percent of the oil
present. A recent analysis of the needs for mechanization in the village
has concluded that this is still the most practical implement, because
it can be made and maintained locally and is inexpensive by comparison
with other presses (C. E. Williams, personal communication, 1981).
However, farmers in Nigeria (which was once the world’s largest exporter
of palm oil) have, since the 1950s, been reluctant to invest in this or
other improvements because of the low producer prices offered by the
state-controlled marketing boards. It is to be hoped that recent reforms
of marketing structures in Nigeria and elsewhere in Africa will
encourage renewed innovation at the village level (Martin 1988: 126—36).
The next development in pressing was the introduction in 1959 of the
hand-operated hydraulic press by Stork of Amsterdam. This was capable of
processing 600 to 1,000 pounds of fruit per hour and could recover 80
percent of the oil present. The hydraulic mechanism was later motorized.
A
different approach to mechanization brought forth the Colin expeller
(first patented in 1904), which in essence is similar to a domestic
mincer. It consists of a perforated cylindrical cage, fitted with a
spiral screw or "worm," which is turned manually through a gear. Cooked
fruit is fed to the worm through a hopper, and the pressure developed as
the worm pushes the fruit forward forces oil out through the
perforations. Spent fiber and kernels are discharged at the end of the
cage. The machine has a capacity of 100 kg cooked fruit per hour, or 250
kg per hour if motorized. The Colin expeller became popular after 1930,
mainly in Cameroon. Its limitations were a reduced efficiency with Dura
fruit, which forms the bulk of the wild oil palm crop; rapid wear of the
screw; and a relatively high cost. The principle of the expeller,
however, has been further developed into the screw press found in all
modern oil mills (Hartley 1988: 703—5).
The presses described here provided a relatively efficient process for
the step of pressing out the oily liquid during oil production and led
researchers to seek improvements in the other steps. Several innovations
have resulted from a project begun by the Nigerian Institute for Oil
Palm Research (NIFOR) during the 1950s in cooperation with the Food and
Agriculture Organization of the United Nations (FAO) and the United
Nations Development Program (UNDP).
The following unit operations and equipment are involved in palm oil
production.
1. Fruit bunch
cookers, which are wood-fired cylindrical tanks. They are loaded
with cut-up fresh fruit bunches (FFB).
2. A bunch
stripper operated by hand, which consists of a cylinder made up of
slats and turns on a horizontal axis that tumbles the cooked bunch
sections until the individual fruits separate from the bunch and
fall between the slats.
3. A digester
(to break up the softened fruit and release its oil from its cells),
consisting of a horizontal cylinder in which beater arms rotate,
driven by a small diesel motor.
4. A hydraulic
press, which was introduced in 1959.
5. A
clarification unit consisting of two linked tanks, whereby heating
with water causes the oil layer in the first tank to overflow at the
top into the second tank. There it is dried by the waste heat from
the fire under the first tank.
Extraction efficiencies of 87 percent at a free fatty acid (FFA) level
of below 4 percent are routinely attainable by this process. Between a
quarter and a half ton of fresh fruit bunches per hour can be processed,
depending on cooker capacity.
A
number of variants of this process are in use:
1. Bunches are
allowed to ferment so that only loose fruit is loaded into the
cooker. This variant yields oil of higher FFA.
2. The hydraulic
presses may be driven by a small diesel engine.
3. Clarification
can take place in simple tanks with direct heating.
4. Cooking of
bunches may be by steam, whereby whole bunches are loaded into a
tank fitted with a perforated plate about 15 centimeters (cm) from
the base. Water is boiled under the plate, and the steam penetrates
through the bunches.
5. In Ghana, an
interesting operating procedure has been developed, in which the
mill owner provides mill facilities to the farmers, who are then
responsible for the bunch stripping and cooking of
the fruit. Mill operatives carry out digesting and pressing
procedures, after which the farmers take away the oil from their own
fruit for clarification (G. Blaak, personal communication, 1989).
The advantages for the farmers are numerous: They need no capital
investment in mill equipment; there are no arguments regarding purchase
price of FFB; if farmers produce high-quality Tenera fruit, they retain
the full benefit; and farmers pay only a processing charge. Their net
profits are higher than those obtained selling FFB, even if they employ
labor to carry out their share of the processing.
Larger-Scale Processes
The small-scale processes just described are suitable for the processing
of FFB from wild oil palm groves or from smallholdings. The main
objective is to produce red palm oil for traditional food use.
The processing of the large quantities of fruit produced by plantations
or by large smallholder cooperatives, however, requires a progressively
greater degree of mechanization and mechanical handling as the quantity
increases. Furthermore, since oil produced on a large scale is usually
intended for export or for local refinery processes, the ultimate
objective is a neutral oil of bland flavor and nearly white color. To
attain this quality, the processes (including the handling of FFB) are
designed to minimize the development of free fatty acids and oil
oxidation.
A
simple factory process of intermediate scale, in which the material is
still handled manually between processing stages, is the Pioneer mill,
which was developed by the United Africa Company around 1939. It is
designed to process about three-quarters of a ton of fruit per hour,
which is the equivalent of about 1 ton of fruit bunches, following the
removal of the fruit from the bunch stalks. The process consists of the
following steps:
1. Autoclaving —
200 kg of fruit is loaded into a vertical batch autoclave mounted on
a gantry and cooked under steam pressure of 20 pounds per square
inch for 15 minutes.
2. After
cooking, the fruit is discharged by gravity into a digester fitted
with a stirrer, which breaks it up and releases the oil from the
cells.
3. The resulting
mash is treated in a basket centrifuge, operating at 1,200
revolutions per minute.
4. The oil
flowing from the centrifuge passes through a screen to remove the
fiber, and then to a settling tank.
5. The settling
tank contains a layer of hot water, and the oil is pumped in below
water level. The water is boiled for 15 minutes and then allowed to
settle. The oil layer is decanted through a hot-water layer in a
second settling tank.
6. The tank is
heated to boiling point for 15 minutes and allowed to settle. The
clean oil is put into drums.
7. The sludge
from the two settling tanks is further treated by boiling and
settling, and the residual oil is recovered.
An oil mill of essentially the same design, with a capacity of 2 to 3
tons of fruit per hour, was featured in the Wembley Exhibition of 1924
by Nigerian Products Ltd., Liverpool, and was apparently demonstrated in
operation there (Elsdon 1926: 316—22). In 1950 there were 13 Pioneer
mills in operation in Nigeria. The numbers increased to 65 in 1953 and
more than 200 in 1962, producing about 25,000 tons. But, subsequently,
their use has declined (Mulder, personal communication, 1968).
The Pioneer mill cannot meet the needs of well-established plantations
generating large volumes of fruit. To keep costs down and output up, it
is vital to have a fully mechanized power-operated mill. The development
of such mills began in Kamerun and in the Congo before World War I.
Mills using centrifuges for oil extraction were in operation in the
Congo in 1916, in Sumatra in 1921, and in Malaya in 1925 (Hartley 1988:
703—5). Centrifuges were largely replaced by hydraulic presses in the
1930s, although they were still being operated at Batang Berjuntai,
Malaysia, in 1982. Batch-fed hydraulic presses were, in turn, replaced
by continuous screw presses, which saved labor and handled much larger
volumes of fruit. At this final stage of innovation, the development of
agricultural and processing technology went hand in hand. The screw
press tended to mangle the fruit of the Dura palm, with its relatively
thin layer of oil-bearing mesocarp, but proved ideally suited to the
Tenera variety (Maycock, personal communication, 1991).
The principal steps involved in the production of palm oil today are the
following:
1. Harvest at
optimum ripeness.
2. Transport FFB
to an oil mill with minimum bruising.
3. Transfer FFB
to sterilizing cages.
4. Sterilize FFB
by steam under pressure.
5. Transfer
cooked FFB to a bunch stripper.
6. Transfer
fruit to a digester.
7. Press in
single-screw or twin-screw press.
8. The oily
discharge from the press, containing water and fruit debris, is
passed through screens and settling tanks.
9. The oil phase
from the settling tanks is passed to a clarifying centrifuge. The
sludge, or heavy phase, from the settling tanks is centrifuged and
the recovered oil returned to the settling tanks.
African Food
Uses
In West Africa, palm oil has a wide range of applications. It is
employed in soups and sauces, for frying, and as an ingredient in doughs
made from the various customary starch foods, such as cassava, rice,
plantains, yams, or beans. It is also a condiment or flavoring for bland
dishes such as fufu (cassava). A basic dish, "palm soup," employs
the whole fruit. The following dishes from Ghana are illustrative of the
wide range of palm oil use (Wonkyi Appiah, personal communication,
1993).
In the case of palm soup, first wash and boil palm fruits. Next, pound
the fruit and mix with water to a paste. Add meat or fish, vegetables,
onions, spices, and salt. Boil for 25 minutes and simmer for a further
15. Serve the soup with cooked rice, yam, plantain, fufu, or
kpokpoi. (The latter is a corn dough, steamed and cooked, with okra
and palm oil stirred in.)
Palm oil is also used in baked dishes, and one popular dish has
different names according to the local language. When Ofam in
Twi, or Bodongi in Fanti, is prepared, ripe plantains are pounded
and mixed with spices, some wheat or corn flour, beans, and perhaps
eggs. Palm oil is stirred into the mixture and the whole is then baked
in the oven. The dish is served with ground nuts. Apiti is a
similar dish, baked in leaves, without beans or eggs.
The characteristic flavor of palm oil prepared by village methods is an
important feature of these dishes. Indeed, it is one of their most
"traditional" features. Several of the other key ingredients, such as
salt, wheat, or (in popular eastern Nigerian dishes) stockfish, became
widely available only in the nineteenth and early twentieth centuries,
when they were imported from Europe in exchange for palm oil itself
(Martin 1988: 28—9, 50).
Early Western
Food Uses
The fully flavored red palm oil produced by West African village methods
has not proved suitable for food use in the importing countries of the
West, where the consumer requires a bland cooking fat, near white in
color, or a margarine, similar in appearance to butter. Today’s
plantation-produced palm oil can be bleached and neutralized to meet
Western requirements, but in the nineteenth and early twentieth
centuries, the high FFA content even of "soft"
West African palm oils made them too difficult and uneconomic to
neutralize (Andersen 1954: 27). Even before loading aboard ship, they
fell far short of the current quality standard of less than 5 percent
FFA, 0.5 percent moisture, and 0.5 percent dirt; and a slow ocean voyage
did little to improve matters, as the acidity tended to increase en
route (Vanneck and Loncin 1951).
Throughout the nineteenth century, exported oil from West Africa was
placed in wooden casks usually supplied from Europe in the "knocked
down" state and put together before being filled. Sailing ships became
much larger in size and were gradually displaced in the second half of
the century by steam ships, which were able to call at a greater number
of ports and make more regular voyages (Lynn 1989). This development
probably improved the overall quality of oil arriving in Europe, but as
the oil was still made on a small scale by different methods and carried
in casks, there was plenty of variation.
This quality problem could have been resolved in the late 1920s, when
bulk storage tanks were installed at some African loading ports,
initially in Nigeria and the Belgian Congo. It was then possible for
incoming oil to be washed and cleaned before bulking, with an
improvement in quality (Iwuchukwu 1965; Mulder, personal communication,
1968). However, hardly any Nigerian palm oil was suitable for the
European food industry until the 1940s.
When Sumatran and, later, Malayan plantations started to export oil in
the 1920s, their fruit was harvested systematically from the beginning.
It was transported with minimal bruising to the factories and processed
in a standardized way. Bulk shipment was developed from the outset. The
first shore tanks were installed at Belawan in North Sumatra in the
1920s, and oil from Malaya was taken there by steamer from 1931 onward.
In 1932 the Malayan planters set up their own Palm Oil Bulking Company
with an installation at Singapore (Shipment of palm oil in bulk 1931;
United Plantations Berhad, unpublished documents; T. Fleming, personal
communication, 1993).
It thus became possible to develop and maintain the quality standards
that are now current worldwide. The planters aimed to produce oil of 3.5
percent FFA, which would then fall well within the limit of 5 percent
FFA on arrival in Europe or America. Oil arriving at above 5 percent FFA
was sold at a discount, depending on the excess acidity (Hartley 1988:
687).
European food manufacturers could now begin to introduce palm oil on a
commercial basis, drawing on earlier experiments and fitting it into two
long-standing patterns of fat use. In central and northern Europe,
indeed in cool weather regions generally, the traditional fats are the
products of the farm yard — butter, beef tallow, and lard. In southern
Europe, with its dry hot climate, olive oil has been in general use for
thousands of years. Thus, consumers have had available either a plastic
product of solid appearance or a clear liquid oil, and the cooking and
eating habits developed accordingly.
Respect for these traditions led to the invention in 1869 of margarine
and its development as a replacement for butter, when the latter was in
short supply. Margarine was originally made from beef fat, and the
plastic nature of butter was attained by blending in a liquid fraction
separated from beef fat by crystallization. Margarine proved so popular
that European supplies of beef fat did not suffice. Imports from the New
World were important in the nineteenth century, but various imported
vegetable oils gradually took the place of beef fat margarine blends as
refining techniques developed. The fact that even "soft" palm oil is a
solid fat in temperate climates, with a consistency quite similar to
butter, made it an obvious candidate for such experiments, and the first
recorded trial took place in 1907 (Feron 1969).
The refining and bleaching process required to render suitable palm oil
involved a great deal of research and empirical know-how. Illustrative
is some unpublished correspondence (copies held by K. G. Berger) between
Dr. Julius Lewkowitsch, a consultant chemist in oils and fats, and a
Liverpool trading house, the African Association Limited. Dr.
Lewkowitsch had invented a process for rendering palm oil into an edible
product and had entered into an agreement, dated January 24, 1905, to
share the costs of development of the process with the African
Association.
Evidently the work proceeded rather slowly, because in September 1907,
Lewkowitsch received a letter from the Vice-Chairman of the African
Association, saying: "I have sent you under separate cover a sample of
refined beef suet. . . . Would it be possible to have the samples of the
palm oil products made up to appear like this sample? I am afraid I
shall never satisfy my Co-Directors until I can show them a palm oil
product they can eat." A successful prototype was probably produced
eventually, because in 1910 a small manufacturing concern, V. B.
Company, was incorporated and the African Association was paying
Lewkowitsch a regular salary as managing director from 1910 to 1912.
The first decade of the twentieth century also saw the introduction of
hydrogenation of oils, a process by which liquid oils could be turned
into plastic or hard fats to a controlled degree. As a result, vegetable
oil—based "shortenings" were produced to replace lard and beef tallow as
ingredients for cakes, pastries, and biscuits and as frying fats. Once
adequately refined, palm oil was easily introduced in blend formula for
these types of products and had the advantage of not requiring
hydrogenation. By the mid-1930s, the relatively clean and less acidic
plantation-produced palm oil of Malaya and Sumatra was finding a ready
market in the United States, where it was used not only in fine toilet
soaps but also in the making of compound lard. Over 50,000 tonnes per
annum were used in the American compound lard industry between 1935 and
1939 (Lim 1967: 130—2).
Wartime interruptions of supplies from Asia during the 1940s forced
American manufacturers to find substitutes for palm oil, and the market
was slow to revive afterwards. However, in Britain, wartime shortages of
butter encouraged the use of palm oil in both margarine and compound
lard, and this market continued to grow in the 1950s (Lim 1967: 131).
British manufacturers, through the home Ministry of Food and the West
African Produce Control Board, were able to corner the market in British
West African palm oil (Meredith 1986). The Produce Control Board and,
from 1949, its successor, the Nigerian Oil Palm Produce Marketing Board,
played an important role in bringing the quality of this oil up to the
standards set in Southeast Asia.
A
grading system was set up as follows:
Grade I under
9 percent FFA
Grade II 9 to
18 percent FFA
Grade III 18
to 27 percent FFA
Grade IV 27
to 36 percent FFA
Grade V over
36 percent FFA
Higher prices were paid for the better grades, and there was an
immediate response from the village producers, which enabled a Special
Grade palm oil to be specified in 1950 with maximum 4.5 percent FFA at
time of purchase. A significant premium was paid for this oil, with the
result that Special Grade oil, which was only 0.2 percent of production
in 1950, jumped to over 50 percent by 1954. In 1955, the specification
was tightened to 3.5 percent FFA, and by 1965 Iwuchukwu (1965) reported
that more than 80 percent of material for export had reached this
quality.
Market
Developments Since 1950
The development (mainly since the 1950s) of convenience foods and of
snack food manufacture on an industrial scale opened up additional uses
for palm oil, because of its good resistance to oxidative deterioration
and its better ability to withstand the high temperatures used in frying
than most alternative oils (Kheiri 1987; Berger 1992). The market
developed especially rapidly after 1970, as the trees planted during the
1960s in Malaysia matured and as the Malaysian government and estate
sector began to promote their product more actively in the West. Asian
markets had also become important by 1980, as Western processing
techniques were applied to meet local needs.
Figure II.E.3.1 shows that the world production of palm oil, together
with its share in world supplies of oils and fats, increased
dramatically from 1970 onward. Yet by this time, in many parts of Africa
the industry had declined (Table II.E.3.6). Nigeria, for example, had no
exportable surplus of oil after 1970 and, in fact, became a net importer
of palm olein in the 1980s. Exports from Zaire became very limited in
the 1980s, and the Ivory Coast, with exports of 60,000 to 100,000 tonnes
per annum, was left as the only significant African supplier. Meanwhile,
as shown in Table II.E.3.6, new Asian producers were emerging, in
particular Papua New Guinea and Thailand. By 1990, exportable surpluses
of 10,000 to 30,000 tonnes per annum were also reaching the world market
from Honduras and Costa Rica (Mielke 1991: 111).
As Malaysian production grew, both the planters and the government
realized that it was vital to improve processing methods and to
encourage the growth in demand for palm oil. The estate sector took the
lead during the 1960s, developing higher grades of crude palm oil to
suit European needs. Later, the government joined in the development of
refineries and new products to suit Asian, as well as Western, tastes.
The old standard of 3.5 percent FFA on leaving the factory continued to
apply to the bulk of crude Malaysian palm oil. However, in the last 30
years it has been recognized that the production of a stable refined
palm oil of good color is also dependent on characteristics other than
FFA content, as shown in Table II.E.3.7. In particular, the degrees of
oxidation and contamination with catalytic traces of metals are
important. But surveys indicate that the peroxide value (a measure of
the state of oxidation) of standard palm oil arriving at Malaysian ports
or refineries fell from 3.9 milligrams per kilogram to 2.3 milligrams
per kilogram between 1974 and 1991 (Jacobsberg 1974; Wong 1981; V. K.
Lal, personal communication, 1991).
Planters, both in the Belgian Congo (Zaire) and in Malaysia, also sought
to develop a premium product with exceptionally low FFA, obtained
through stricter harvesting routines and processing with minimum delay.
"Special Prime Bleach" (SPB) grade was developed in the Belgian Congo
(Loncin and Jacobsberg 1965), having a maximum of 2 percent FFA and
reduced levels of iron and copper contamination, while in Malaysia two
special grades became available, namely "SQ" and "Lotox." The SQ and
Lotox specifications include limits for oxidation characteristics as
well as trace metals and in practice satisfy the most stringent
requirements of the European market (Johansson and Pehlergard 1977).
A
separate development, which also improved the quality of palm oil
arriving in Europe, was the introduction in the 1960s of "parcel
tankers." These are specialized ships of up to 30,000 tons. The cargo
space is subdivided into a number of separate tanks, generally with a
capacity of between 100 and 1,000 tons. Tanks are fitted with separate
pumps and pipelines so that different liquid cargoes can be carried
without contamination. With the very large export trade from Southeast
Asia, parcel tankers are capable of economically carrying palm oil and
other oils of different grades to destinations all over the world.
Appropriate shore installations have been developed since 1960 in the
exporting ports of Southeast Asia and in most receiving ports in Europe,
United States, and Japan, and are being developed in countries that have
only recently become large importers. Like the development of bulk
shipment from Malaya in the 1930s, this innovation was fostered by
cooperation among the planters, who marketed their oil through a common
Malayan Palm Oil Pool from 1953 to 1974 (Allott and Wong 1977).
By 1974 the volume of Malaysian oil exports and the diversity of markets
had grown to the point at which a free marketing system was more
appropriate. The range of palm oil products exported was also growing,
following the application of the fractionation process first developed
for beef tallow in the 1870s. This technique separated crude palm oil
into olein and stearin. The olein remains a liquid oil in hot climates
and, therefore, readily fitted into the large Indian demand for cooking
oil.
From 1970 the Malaysian government encouraged and licensed private
enterprises to set up refineries that could both fractionate palm oil
and use it in a more traditional manner to produce shortenings for Asian
markets. In India, for example, there is a large consumer demand for
vanaspati, a shortening developed as a replacement for butterfat ghee.
Similar shortening products are traditional in Pakistan, Egypt, and
other Middle East countries. Often lacking their own refining
facilities, such countries have tended to import palm oil products from
Malaysia in fully processed, ready-to-eat form.
The Malaysian government encouraged this trend by offering tax
concessions for refineries in their early years and by progressive
remission of the export tax on crude palm oil, graded according to the
degree of processing of the end product. This development received a
mixed reaction in Western Europe, which had ample processing capacity
and extensive technical know-how (Berger, personal observation).
However, it proved successful in stimulating the growth of new Asian
markets, as shown in Table II.E.3.8.
Although private enterprises had an excellent record in developing new
processing techniques, they often felt hampered by their distance from
major markets, which posed difficulties in designing and introducing new
products. In 1979 the Malaysian government set up a specialized Palm Oil
Research Institute (PORIM) as a statutory body, financed by a levy on
palm oil production. A major part of its mission was the development of
application technology for palm oil and the propagation of the
information to end users anywhere in the world. By studying consumption
patterns of oils and fats, the Institute’s staff was able to identify
potential new markets and provide the technical input needed for their
development (PORIM 1981: 1—5). Their work proved useful to producers
worldwide, especially from the late 1980s on when a debate arose over
palm oil’s nutritional value.
Nutritional
Properties of Palm Oil
Briefly, the general nutritional functions of fat are to:
1. Provide
energy efficiently.
2. Supply the
essential linoleic and linolenic acids.
3. Carry the fat
soluble vitamins A, D, and E.
4. Improve the
palatability of foods.
The specific nutritional properties of palm oil may be considered in
relation to its chemical composition. Typical values are given in Table
II.E.3.9.
The unsaturated acids present are mainly oleic, with a useful level of
linoleic and a small amount of linolenic acid. In consequence, palm oil
has a high stability to oxidation. Palm oil is readily absorbed and
shows a digestibility of 97 percent or greater, similar to that of other
common edible oils.
As in other vegetable oils, the middle 2-position is mainly occupied by
unsaturated fatty acids. This is different from animal fats, where the
2-position is usually occupied by a saturated fatty acid.
Unrefined, or "virgin," palm oil is one of the richest natural sources
of carotenoids. Regrettably, these are removed during the industrial
refining process so that their nutritional benefits are lost, except to
populations who traditionally use palm oil in the unrefined state.
The tocopherol content (see Table II.E.3.10) is one of the most
interesting features in palm oil because it consists mainly of the
tocotrienols, with an unsaturated side chain. These are not found in the
other common vegetable oils.
Analytical work has shown that an average of 50 to 60 percent of the
tocopherol content remains after refining, but the extent of removal
depends on the refining conditions used. The tocopherols are important
natural antioxidants, although their antioxidant activity is somewhat
lower than the synthetic phenolic antioxidants permitted in foods. They
are less volatile and, therefore, more persistent in high-temperature
conditions, such as in deep-fat frying. The tocopherol content is a
major factor in stabilizing palm oil against oxidation. The nutritional
benefit of tocopherols in a number of disease conditions in which free
radicals or oxidation are implicated has become a very active field of
research, although to date little has been done on tocotrienols as such.
The three major component fatty acids of palm oil — palmitic, oleic, and
linoleic acids — are also the most common fatty acids found in vegetable
oils. Palm oil has been used as a traditional food in West Africa
probably for thousands of years, which provides some evidence that it
has good nutritional properties.
Research into coronary heart disease in relation to diet led to the
general hypothesis of A. Keys, J. T. Anderson, and F. Grande (1957) that
saturated fatty acids raised blood cholesterol levels, whereas linoleic
acid reduced them. Subsequent refinements of the hypothesis (Hegstedt et
al. 1965) indicated that saturated acids did not all have the same
effect. In particular, D. M. Hegstedt and colleagues concluded that
myristic acid was 3 to 4 times more effective than palmitic acid in
raising blood cholesterol levels.
The early work leading to these hypotheses did not use palm oil in the
experimental diets. However, between 1985 and 1987, concern was
expressed in the media, principally in the United States, that the
saturated fatty acid content of palm oil meant that it would raise blood
cholesterol levels and was, therefore, an undesirable food component.
This assertion was not based on any direct experimental evidence.
Instead, a review of the few dietary experiments in which palm oil had
been used (as a control, not as the subject of investigation) showed
that, in general, a small reduction in blood cholesterol level was
experienced (New findings on palm oil 1987).
Subsequently, a study in Nigeria, a principal traditional consumer of
palm oil, was published (Kesteloot et al. 1989). Serum lipid levels were
measured in 307 men and 235 women, whose ages were 15 to 64 (mean 38.8)
for men and 15 to 44 (mean 31.4) for women. Mean values for total serum
cholesterol were 156.3 and 170.9, respectively, and for HDL cholesterol
46.0 and 49.0. Subjects consumed their normal diet, with 84 percent of
the fat intake from palm oil. These serum lipid levels compared very
favorably with black and white populations in the United States, where
total fat intake is much higher, and where palm oil comprises only 1 to
2 percent of total fat intake (Park and Yetley 1990).
A
number of new dietary studies have addressed the nutritional properties
of palm oil, particularly in its effect on blood lipids. T. K. W. Ng and
colleagues (1991), for example, found that when palm olein formed 75
percent of fat intake in a normal Malaysian diet, total serum
cholesterol was significantly reduced, by 9 percent from the level at
entry, and that the reduction was almost entirely in the undesirable LDL
cholesterol. The study was carried out on 20 men and 7 women of average
age 24.
A. Marzuki and colleagues (1991) used 110 residential high school
students of both sexes as subjects (ages 16 to 17). Although the normal
menu was provided, palm olein was the sole cooking oil for 5 weeks. This
was followed by a "washout" period of 6 weeks on regular cooking oil and
a second experimental 5 weeks in which only soya bean oil was used.
There was no difference in plasma total LDL or HDL cholesterol between
the two trial periods.
K. Sundram and colleagues (1992) carried out a double blind crossover
study on 38 men, in which 70 percent of the fat in a normal Dutch diet
was replaced by palm oil. There was no effect on total serum
cholesterol, but a significant increase of 11 percent in HDL 2
cholesterol, resulting in a beneficial decrease in the LDL/HDL 2+3
ratio. G. Hornstra and co-workers (1991) also measured plasma
lipoprotein (a), which is strongly associated with an increased risk of
ischemic cardiovascular disease. They found a highly significant 10
percent decrease in this component during the test diet period, and the
decrease was greatest in subjects with an initial high level of
lipoprotein (a), that is, those with an enhanced risk.
R. Wood and colleagues (1993) examined the effect of six different fats
used as components of items of a normal American diet on 30 middle-aged
men. When refined palm oil formed 60 percent of the dietary fat intake,
there was no significant effect on total cholesterol, but HDL
cholesterol was increased compared with the baseline diet.
Ng and colleagues (1992) studied 33 subjects consuming a Malaysian diet
containing 34 percent of calories as fat. When palm olein was 23 percent
of energy (that is, two-thirds of the fat intake), there was no
significant difference in serum total — LDL or HDL cholesterol contents
from the levels at entry. The use of olive oil in place of palm olein
gave almost identical results, although the ratio of Thromboxane B2 to
Prostacyclin PGFI alpha was significantly lower during the palm olein
dietary period.
D. Heber and colleagues (1992) found no increase in the plasma total
cholesterol level of 9 subjects, but a small rise in plasma HDL
cholesterol when one-half of the dietary fat was palm oil. The diet
contained 35 percent energy as fat.
A. S. Truswell and co-workers (1992) conducted 2 trials (21 and 30
subjects, respectively) in which one-half of the dietary fat was palm
olein. He found that a 10 percent increase in HDL cholesterol accounted
for the 3 percent rise in total cholesterol observed.
The conclusion is that palm oil, used as a dietary fat at a high level —
10 to 20 times that usual in a Western diet — does not raise serum total
cholesterol. However, the level of serum HDL cholesterol (popularly
described as the "good" cholesterol, because in this form cholesterol is
catabolized and removed) was significantly increased in several of the
recent studies.
Mention might also be made of two additional studies, by R. C. Cottrell
(1991) and C. E. Elson (1992). These authors reviewed 139 and 180
scientific publications, respectively, and both concluded that palm oil
was a nutritionally satisfactory component of the diet. Cottrell wrote
that "the decision to use palm oil in food products should be based on a
rational appraisal of its technical performance value rather than on a
misconceived view of the health implications of its use" (Cottrell 1991:
989S—1009S).
Nonetheless, the view still persists in some circles that palm oil is an
unhealthy tropical grease, and it is difficult for palm oil producers to
counter this perception because the product had little or no public
image among Western and Asian consumers before the start of the recent
media debate. Processed until it has become an anonymous ingredient, and
used in a wide variety of compound fats and such other items as
biscuits, its original flavor and feel have been lost to most consumers.
But now that the wider nutritional benefits of palm oil’s natural
carotenoids are becoming more generally recognized, perhaps it is time
to rediscover the fully flavored red oil and promote its use, not only
in Africa and Latin America but also in Asia and the West.
K.
G. Berger
S. M. Martin
Was
this article helpful to you? Share it with others:
Bibliography
Allott, D. H. N., and I. C. H. Wong. 1977. Evolution of palm oil
marketing from Malaysia. In International developments in palm oil,
ed. D. A. Earp and W. Newall, 469—78. Kuala Lumpur.
Amiruddin, M. N., and I. Ahmad. 1984. Prospects for palm oil in the
Middle East and selected African countries. In Proceedings of the
international seminar on market development for palm oil products,
ed. Y. Basiron and K. G. Berger, 131—9. Kuala Lumpur.
Andersen, A. J. C. 1954. Margarine. London.
Anwar, M. 1981. Current and prospective situations of the oil
palm/palm oil industry. Palm Oil Research Institute of Malaysia,
Occasional Paper No. 1. Kuala Lumpur.
Beirnaert, A., and R. Vanderweyen. 1941. Contribution à l’étude
génétique et biométrique des variétés d’Elaeis guineensis jacquin.
Publications de l’Institut National pour l’Étude Agronomique, Série
Scientifique 27. Belgian Congo.
Berger, K. G. 1983a. Palm oil. In Handbook of tropical foods, ed.
Harvey T. Chan and Marcel Dekker, 447—56. New York.
1983b. Past, present and future oils and fats supplies. Proceedings
of the Institute of Food Science and Technology 16: 41—7.
1992. Food uses of palm oil. Kuala Lumpur.
Bulletin Perkebunan. 1991. Vol. 22: 230—1.
Cottrell, R. C. 1991. Introduction: Nutritional aspects of palm oil.
American Journal of Clinical Nutrition 53: 989S—1009S.
Courade, G. 1977. Les plantations industrielles d’Unilever au
Cameroun. Yaounde, Cameroon.
Creutzberg, P. 1975. Changing economy in Indonesia, Vol. 1.
Amsterdam.
Elsdon, G. D. 1926. Edible oils and fats. London.
Elson, C. E. 1992. Tropical oils: Nutritional and scientific issues.
Critical Reviews in Food Science and Nutrition 31: 79—102.
Empire Marketing Board. 1932. No. 54: Survey of vegetable oilseeds
and oils, Vol. 1: Oil palm products. London.
Faulkner, O. T., and C. J. Lewis. 1923. Native methods of preparing palm
oil. II. Nigeria: Second Annual Bulletin of the Agricultural
Department, 3—10.
Feron, R. 1969. Technology and production. In Margarine: An economic,
social and scientific history, 1869—1969, ed. J. H. Van Stuyvenberg,
83—121. Liverpool.
Fieldhouse, D. K. 1978. Unilever overseas: The anatomy of a
multinational, 1895—1965. London and Stanford, Calif.
Friedel, M. C. 1897. Sur des matières grasses trouvées dans des tombes
égyptiennes d’Abydos. Comptes Rendu 24: 648—51.
Gapor, A., and K. G. Berger. 1983. Tocopherols and tocotrienols in palm
oil. In Palm oil product technology in the eighties, ed. E.
Pushparajah and M. Rajadurai, 145—56. Kuala Lumpur.
Gray, J. E. 1922. Native methods of preparing palm oil. Nigeria:
First Annual Bulletin of the Agricultural Department, 29—50.
Hancock, W. K. 1942. A survey of British Commonwealth affairs,
Vol. 2, Part 2. London.
Hartley, C. W. S. 1988. The oil palm (Elaeis guineensis Jacq.).
Third edition. London.
Heber, D., J. M. Ashley, M. E. Solares, et al. 1992. The effects of a
palm oil enriched diet on plasma lipids and lipoproteins in healthy
young men. Nutrition Research 12: S53—S61.
Hegsted, D. M., R. B. McGandy, M. L. Myers, and F. J. Stare. 1965.
Quantitative effects of dietary fat on serum cholesterol in man.
American Journal of Clinical Nutrition 17: 281—95.
Hopkins, A. G. H. 1973. An economic history of West Africa.
London.
Hornstra, G., A. C. Van Houwelingen, A. D. M. Kester, and K. Sundram.
1991. A palm oil enriched diet lowers serum lipoprotein (a) in
normocholesterolemic volunteers. Atherosclerosis 90: 91—3.
Iwuchukwu, A. N. 1965. Influence of marketing boards system and
preliminary purification on Nigerian palm oil exports. In Proceedings
of oil palm conference at Tropical Products Institute, 73—7. London.
Jacobsberg, B. 1974. Survey of the palm oil production in 1973. In
Proceedings of the first Malaysian Agricultural Research and Development
Institute workshop on palm oil technology, 72—119. Kuala Lumpur.
Jewsiewicki, B. 1983. Rural society and the Belgian colonial economy. In
History of Central Africa, Vol. 2, ed. D. Birmingham and P. M.
Martin, 95—125. London.
Johansson, G.,
and P. O. Pehlergard. 1977. Aspects on quality of palm oil. In
International developments in palm oil, ed. D. A. Earp and W.
Newall, 203—23. Kuala Lumpur.
Kesteloot, H., V. O. Oviasu, A. O. Obasohan, et al. 1989. Serum lipid
and apolipoprotein levels in a Nigerian population sample.
Atherosclerosis 78: 33—8.
Keys, A., J. T. Anderson, and F. Grande. 1957. Prediction of serum
cholesterol responses of man to changes in fats in the diet. Lancet
11: 959—66.
Kheiri, S. A. 1987. End uses of palm oil: Human food. In Critical
reports on applied chemistry, Vol. 15: Palm oil, ed. F. D.
Gunstone, 71—83. London.
Khera, H. S. 1976. The oil palm industry of Malaysia: An economic
study. Kuala Lumpur.
Laurent, M. 1912—13. Notes sur l’Elaeis au Congo Belge. Bulletin
Agricole du Congo Belge, 3: 938—45; 4: 695—701.
Leplae, E. 1939. Le palmier à huile en Afrique: Son exploitation au
Congo Belge et en Extrême-Orient. Brussels.
Lewkowitsch, J. 1895. Chemical technology and analysis of oils, fats
and waxes. London.
1922. Chemical technology and analysis of oils, fats and waxes.
Sixth edition. London.
Lim, C.-Y. 1967. Economic development of modern Malaya. Kuala
Lumpur.
Loncin, M., and B. Jacobsberg. 1965. Research on palm oil in Belgium and
the Congo. In Proceedings of oil palm conference at Tropical Products
Institute, 85—95. London.
Lynn, M. 1989. From sail to steam: The impact of the steamship services
on the British palm oil trade with West Africa, 1850—1890. Journal of
African History 30: 227—45.
Manning, P. 1982. Slavery, colonialism and economic growth in
Dahomey, 1640—1960. Cambridge.
Martin, S. M. 1988. Palm oil and protest: An economic history of the
Ngwa region, south-eastern Nigeria, 1800—1980. Cambridge.
Marzuki, A., F. Arshad, T. A. Razak, and K. Jaarin. 1991. Influence of
dietary fat on plasma lipid profiles of Malaysia adolescents.
American Journal of Clinical Nutrition 53: 1010S—14S.
Meredith, D. 1986. State controlled marketing and economic
"development": The case of West African produce during the Second World
War. Economic History Review, 2nd series 39: 77—91.
Mielke, S., ed. 1988. Oil world. Hamburg.
1991. Commodity section. Oil world annual. Hamburg.
Moll, H. A. J. 1987. The economics of the oil palm. Wageningen,
Netherlands.
New findings on palm oil. 1987. Nutritional Review 45: 205—7.
Ng, T. K. W., K. Hassan, J. B. Lim, et al. 1991.
Non-hypercholesterolemic effects of a palm oil diet in Malaysian
volunteers. American Journal of Clinical Nutrition 53: 1015S—20S.
Ng, T. K. W., K. C. Hayes, G. DeWitt, et al. 1992. Dietary palmitic acid
(16:0) and oleic acid (18:1) exert similar effects on serum cholesterol
and lipoprotein profiles in normo cholesterolemic humans. Journal of
the American College of Nutrition 11: 383—90.
Northrup, D. 1978. Trade without rulers: Pre-colonial economic
development in south-eastern Nigeria. Oxford.
Nwanze, S. C. 1965. Semi-commercial scale palm oil processing.
Proceedings of oil palm conference at Tropical Products Institute,
63—6. London.
Palm Oil Registration and Licensing Authority. 1993. Palm Oil Update:
March. Kuala Lumpur.
Park, Y. K., and E. A. Yetley. 1990. Trend changes in use and current
intakes of tropical oils in the United States. American Journal of
Clinical Nutrition 51: 738—48.
PORIM. 1981. Palm Oil Research Institute of Malaysia: Annual research
report. Kuala Lumpur.
Reid, J. 1986. Warrior aristocrats in crisis: The political effects of
the transition from the slave trade to palm oil commerce in the
nineteenth century kingdom of Dahomey. Ph.D. thesis, University of
Stirling, Scotland.
Rosenquist, E. 1986. The genetic base of oil palm breeding populations.
Proceedings of international workshop on oil palm germplasm and
utilisation, March 1985. Kuala Lumpur.
Rudin, H. R. 1938. Germans in the Cameroons, 1884—1914: A case study
in modern imperialism. New Haven, Conn.
Shipment of palm oil in bulk. 1931. The Planter 11—12: 353—4.
Sundram, K., G. Hornstra, A. C. Van Houwelingen, and
A. D. M. Kester. 1992. Replacement of dietary fat with palm oil: Effect
on human serum lipids, lipoproteins and apolipoproteins. British
Journal of Nutrition 68: 677—92.
Taniputra, B., A. W. Lubis, K. Pamin, and S. Syukur. 1988. Progress of
oil palm industry in Indonesia in the last 15 years: 1971—1985.
Proceedings of international oil palm conference, Kuala Lumpur,
September 1987, 27—34. Kuala Lumpur.
Truswell, A. S., N. Choudhury, and D. C. K. Roberts. 1992. Double blind
comparison of plasma lipids in healthy subjects, eating potato crisps
fried in palm olein or canola oil. Nutrition Research 12:
S43—S52.
Vanderyst, R. P. H. 1920. La technique indigène de récolte des fruits de
l’Elaeis. Bulletin agricole du Congo Belge 11: 22—35.
Vanneck, C., and M. Loncin. 1951. Considérations sur l’alteration de
l’huile de palme. Bulletin agricole du Congo Belge 42: 57—64.
Wilson, C. 1954. The History of Unilever, Vol 1. London.
Wilson, L. E. 1991. The Krobo people of Ghana to 1892: A political
and social history. Athens, Ohio.
Wong, C. Y. 1981. Malaysian crude palm oil quality delivered to
refiners. In Palm oil product technology in the eighties, ed. E.
Pushparajah and M. Rajadurai, 81—7. Kuala Lumpur.
Wood, R., K. Kubena, R. Crook, et al. 1993. Effects of palm oil,
margarine, butter, and sunflower oil on the serum lipids and
lipoproteins of hormocholesterolemic middle aged men. Journal of
Nutritional Biochemistry 4: 286—97.